Thinking of using bathroom fixtures for your kitchen? While the idea would surprise many, nearly everyone knows that doing so is quite practical and useful.
Partly because nothing is meant for a single kind of usage, so when we are talking about a ‘bathroom light fixture,’ we are talking about a wall bracket fixture that could be used anywhere. In your kitchen too. Experts at Devina Home help people achieve it successfully.
These multilight fixtures are more often used in bathrooms, which is how they got their name, but they could also be used in your kitchen.
Contents
How to Install Bathroom Light Fixture?
Installing and changing the bathroom light fixture in your kitchen will be easy if you follow the steps below. Let’s get started!
Things You’ll Need
Here is a list of the things that you may need;
- Good solid ladder
- Voltage tester
- Wire stripper
- Needle nose plier
- Drill
- Level
1. Decide Where You Want to Place It
Ideally, you should install the wall sconces at least 5 to 6 feet above the floor and at a minimum distance of 60cm.
If you want to install the vanity light, then find the place where you think it will fulfill the purpose of providing light as well as cosmetic benefits. Once you know how to change bathroom light fixture, you will be able to do it for other lights also.
2. Turn the Power Off
This is essential because you do not want to have a short circuit or blow your house up. Before installing the lighting, put the power off at the resistor and breaker box.
3. Remove Your Present Light or Fixture
How to change a light fixture in the bathroom or kitchen? Remove the light that you already have in your kitchen. First, remove the electric bulbs from the fixture. Detach the plate from the mounting bracket with the help of the drill.
There will be some exposed wires that are coming out of the wall. Open and uncoil the connectors that connect wires and remove the wires. Take the mounting plate off.
4. Position and Install the Mounting Bracket
Install the new mountain bracket by attaching it to a junction box with the help of the screws. Make sure that the bracket is not crooked and is properly leveled with the help of the level.
5. Reattach the Wiring Properly
Attach the ground wire, usually green in color, with the grounding screw. Attach the hot black wires by convoluting the intertwined wires. Put the wires underneath the nuts and twist them clockwise to ensure that the wires are properly secured.
Twist and attach the white wires in the same manner.
6. Connect the Fixture
Connect the fixture with the mounting bracket and attach the new shades. Attach the lightbulbs with the screw.
7. Turn on the Power
Put the power on to check that everything is fixed and connected properly.
How to change light fixture in the kitchen? Following these steps, you can also change kitchen fixture and replace them accordingly.
In Conclusion:
Installing new bathroom light fixture in the kitchen may seem like a daunting task, but done properly, it’s actually very simple. First, you must decide where to place your fixture, then after turning off the lights, remove any old fixtures you may have. After attaching the mounting brackets and reattaching the wiring back again, you may connect them, turn on the power and let your bathroom take a fresh air.
If you have any questions, just get in touch with Devina Home and we’ll answer them!
Resources:
How to Replace Bathroom Vanity Light
Your Step-by-Step Guide to Installing Bathroom Light Fixtures
0 comments